GB/T 5629.1-1985 Flared tapered thread right angle pipe fittings
Basic Information
Standard ID:
GB/T 5629.1-1985
Standard Name: Flared tapered thread right angle pipe fittings
Chinese Name:
扩口式锥螺纹直角管接头
Standard category:National Standard (GB)
state:Abolished
Date of Release1985-01-01
Date of Implementation:1986-09-01
Date of Expiration:2008-11-01
standard classification number
Standard ICS number:Fluid systems and general parts>>Pipeline components and pipelines>>23.040.60 Flanges, pipe joints and connecting parts
Standard Classification Number:Machinery>>General Parts>>J15 Pipe Accessories
Publication information
publishing house:China Standards Press
Publication date:1986-09-01
other information
Release date:1985-11-25
Review date:2004-10-14
Drafting unit:Standardization Institute of the Ministry of Machinery Industry
Focal point unit:National Technical Committee for Standardization of Pipe Accessories
Publishing department:National Bureau of Standards
competent authority:China Machinery Industry Federation
Introduction to standards:
This standard applies to flared cone thread right angle pipe joints for pipeline systems with oil and gas as the medium. GB/T 5629.1-1985 Flared cone thread right angle pipe joints GB/T5629.1-1985 Standard download decompression password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of China
Flared type tube fittings-
Male elbow - Assembly
This standard applies to flared tapered thread right angle pipe fittings for pipeline systems with oil and gas as the medium. A type
GB5647-
GB 5646 -R5
GH 5629.2-
GB S64K-.
GiB 5629.2
Marking example:
A type 11 thread angle pipe fitting with a grid outer diameter of 10mm: control head A10 (B 5629.1-85
National Bureau of Standards 1985-11-25
UDC 621.643.4
GB 5629.185
1986-09-01Implementation
Outer diameter of pipe
GB5629.1---85
Technical conditions shall be in accordance with the provisions of GB5653-85 "Technical conditions for mouthguard pipe joints". Additional remarks:
This standard was proposed by the Ministry of Machinery Industry of the People's Republic of China and is under the jurisdiction of the Standardization Research Institute of the Ministry of Machinery Industry. Quality ()
kg/too www.bzxz.net
This standard was initiated by the Standardization Research Institute of the Ministry of Machinery Industry, Shanghai Hydraulic Accessories!, Changchun Automobile Research Institute, and Shanghai Hydraulic and Pneumatic Research Institute. The main drafters of this standard are Hu Luniu, Li Ningning, and Zhang Qianlong.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.