JB/T 9162.5-1999 Dimensions of 55° convex table seat
Basic Information
Standard ID:
JB/T 9162.5-1999
Standard Name: Dimensions of 55° convex table seat
Chinese Name:
55°凸形表座 尺寸
Standard category:Machinery Industry Standard (JB)
state:in force
Date of Release1999-05-20
Date of Implementation:2000-01-01
standard classification number
Standard ICS number:Mechanical Manufacturing>>Machine Tools>>25.080.01 General Machine Tools
Standard Classification Number:Machinery>>Process Equipment>>J44 General Fixture
Publication information
other information
Focal point unit:Mechanical Science Research Institute
Introduction to standards:
JB/T 9162.5-1999 JB/T 9162.5-1999 55° convex seat dimensions JB/T9162.5-1999 Standard download decompression password: www.bzxz.net
Some standard content:
JCS 25.080.01
Machinery Industry Standard of the People's Republic of China
JB/T9162.1-9162.48--1999
Inspection fixture parts and components
The parts and units of inspection jig1999-05-20 Issued
State Machinery Industry Bureau
Implementation on 2000-01-01
Machinery Industry Standard of the People's Republic of China
Convex table seatbZxz.net
Base llh Ssceonvex euide
Dimensiong
The hand standard specifies the type and size of 5° convex table seat. The type and size
The type and size shall be in accordance with the provisions of the following figure and table. b
Marking example:
Marking of 55° convex table seat with R=50mm: Table seat 10×5nJB/T 9162.5—1999
Approved by the State Machinery Industry Bureau on 1999-05-20H
JB/T9162.5—1999
Generated 213J44 001.-B
2000-01-01 Implementation
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.