JB/T 9163.9-1999 Dimensions of gear shaping cutter sockets
Basic Information
Standard ID:
JB/T 9163.9-1999
Standard Name: Dimensions of gear shaping cutter sockets
Chinese Name:
插齿刀接套 尺寸
Standard category:Machinery Industry Standard (JB)
state:in force
Date of Release1999-05-20
Date of Implementation:2000-01-01
standard classification number
Standard ICS number:Mechanical Manufacturing>>Machine Tools>>25.080.01 General Machine Tools
Standard Classification Number:Machinery>>Metal Cutting Machine Tools>>J52 Machine Tool Accessories and Accessories
Publication information
other information
Focal point unit:Mechanical Science Research Institute
Introduction to standards:
JB/T 9163.9-1999 JB/T 9163.9-1999 Gear Shaping Cutter Socket Dimensions JB/T9163.9-1999 Standard download decompression password: www.bzxz.net
Some standard content:
ICS 25. 080. 01
Machinery Industry Standard of the People's Republic of China
JB/T9163.1~9163.20--1999
Fixtures and attachments for gear cutting machine
Fixtures and attachments for gear cutting machine1999-05-20Promulgated
Approved by State Machinery Industry Bureau
Implementation on 2000-01-01
Machinery Industry Standard of the People's Republic of China
Foint bushes for gear shaping cutterDimensions
JB/19163.9—1999
This standard specifies the dimensions of gear shaping cutters and is applicable to disc-shaped gear shaping cutters that are tightened with screws for tipping. 2 Type and size
Long-term technology The following figure stipulates:
3 Marking
Example:
The mark of the two toothed blades with a diameter of 20m
Connection 20JBT916391999
Approved by the State Machinery Industry Bureau on 1999-05-2070
Implementation on 2000-01-01
JB/T0163.9—1999
(Prompt attachment)
Schematic diagram of the use of the hernia tooth joint
--JB/T 9:65.719www.bzxz.net
I/T B0,19:
CP-STHS-1556
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.