GB/T 3910-1983 Line spacing and character spacing for office machines and data processing equipment
Basic Information
Standard ID:
GB/T 3910-1983
Standard Name: Line spacing and character spacing for office machines and data processing equipment
Chinese Name:
办公机器和数据处理设备 行间距和字符间距
Standard category:National Standard (GB)
state:in force
Date of Release1983-11-02
Date of Implementation:1984-10-01
standard classification number
Standard ICS number:Information technology, office machinery and equipment >> 35.160 Microprocessor systems
Standard Classification Number:Electronic Components and Information Technology>>Computer>>L63 Computer Peripherals
associated standards
Procurement status:=ISO 4882-79
Publication information
publishing house:China Standards Press
Publication date:1984-10-01
other information
Release date:1983-11-02
Review date:2004-10-14
Drafting unit:Electronics Department No. 734 Factory
Focal point unit:National Information Technology Standardization Technical Committee
Publishing department:National Bureau of Standards
competent authority:National Standardization Administration
Introduction to standards:
This standard specifies the preferred line spacing and character spacing. It is applicable to general data processing equipment but not to Chinese character information processing equipment. GB/T 3910-1983 Line spacing and character spacing for office machines and data processing equipment GB/T3910-1983 Standard download decompression password: www.bzxz.net
Some standard content:
1 Introduction National Standard of the People's Republic of China Office machines and data processing equipment Line spacngs and character spacings UDC681.3 GB 8910—83 #=IS0 4882 - 79 1.1 This standard is equivalent to the international standard ISO 4882-1979 "Line spacing and character spacing for office machines and data processing equipment".
This standard specifies the preferred line spacing and character spacing. It is applicable to general data processing equipment but not to low-end Chinese character processing equipment. 1.2
2 Line spacing and character spacing
2.1 Line spacing
The preferred line spacing is 4.233mm
When pattern spacing is required, 3.175mm can be used.
2.2 Character spacing
The preferred character spacing is 2.54mms
When fine spacing is required; 2.117 mm can be used; in situations where copying is not required, the character spacing can be 1.693mm Note: In data processing or remote communication applications, printing equipment that does not adopt the preferred solution will cause communication difficulties. Additional remarks:bZxz.net
This standard was proposed by the Standardization Research Institute of the Ministry of Electronics. This standard is funded by Nanjing Cable TV, Ministry of Electric Power. The section "Inappropriate for Chinese Information Places" is supplemented in consideration of the characteristics and usage of Chinese characters. Issued by the National Bureau of Standards on November 2, 1983 | TT | Implementation on October 1, 1984
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.