JB/T 9162.8-1999 Column dimensions
Basic Information
Standard ID:
JB/T 9162.8-1999
Standard Name: Column dimensions
Chinese Name:
表柱 尺寸
Standard category:Machinery Industry Standard (JB)
state:in force
Date of Release1999-05-20
Date of Implementation:2000-01-01
standard classification number
Standard ICS number:Mechanical Manufacturing>>Machine Tools>>25.080.01 General Machine Tools
Standard Classification Number:Machinery>>Process Equipment>>J44 General Fixture
Publication information
other information
Focal point unit:Mechanical Science Research Institute
Introduction to standards:
JB/T 9162.8-1999 JB/T 9162.8-1999 Column dimensions JB/T9162.8-1999 Standard download decompression password: www.bzxz.net
Some standard content:
JCS 25.080.01
Machinery Industry Standard of the People's Republic of China
JB/T9162.1-9162.48--1999
Inspection fixture parts and components
The parts and units of inspection jig1999-05-20 Issued
State Machinery Industry Bureau
2000-01-01 Implementation
Machinery Industry Standard of the People's Republic of China
Upright postwww.bzxz.net
imngong
This standard specifies the types and sizes of the hanging
2 Types and sizes
Types and sizes shall be as specified in the following figures and tables.
Marking example:
Marking for the limited difference
=[2,160m]
Table 12×160JB/T9162.8——1999
National Machinery Industry Corporation approved 2G on 1999-05-20
JB/T9162.8—1999
Chemical ZB J44GIR-ST
M12×1.25
Implementation on 2000-01-01
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.