JB/T 9162.2-1999 V-groove meter stand dimensions
Basic Information
Standard ID:
JB/T 9162.2-1999
Standard Name: V-groove meter stand dimensions
Chinese Name:
V 型槽表座 尺寸
Standard category:Machinery Industry Standard (JB)
state:in force
Date of Release1999-05-20
Date of Implementation:2000-01-01
standard classification number
Standard ICS number:Mechanical Manufacturing>>Machine Tools>>25.080.01 General Machine Tools
Standard Classification Number:Machinery>>Process Equipment>>J44 General Fixture
Publication information
other information
Focal point unit:Mechanical Science Research Institute
Introduction to standards:
JB/T 9162.2-1999 JB/T 9162.2-1999 V-groove table seat dimensions JB/T9162.2-1999 Standard download decompression password: www.bzxz.net
Some standard content:
JCS 25.080.01
Machinery Industry Standard of the People's Republic of China
JB/T9162.1-9162.48--1999bzxz.net
The parts and units of inspection jig1999-05-20 Issued
State Machinery Industry Bureau
Implementation on 2000-01-01
Machinery Industry Standard of the People's Republic of China
V-groove seat
Baat with -slot bottom
-imnensinns
This standard specifies the types and sizes of V-shaped seats. Type and size
Type and size shall be in accordance with the provisions of the table and table
Marking example:
Marking of 25mm V-shaped base:
1D×25JB/T9162.2-1999
Guohao Machinery Industry Co., Ltd. 1999-05-20 approved 2
3B/T9162.2—1999
Generation # ZB J44 DO.2-87
2000-01-01 actual storage
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.