JB/T 9162.27-1999 Ball head clamp dimensions
Basic Information
Standard ID:
JB/T 9162.27-1999
Standard Name: Ball head clamp dimensions
Chinese Name:
球头表夹 尺寸
Standard category:Machinery Industry Standard (JB)
state:in force
Date of Release1999-05-20
Date of Implementation:2000-01-01
standard classification number
Standard ICS number:Mechanical Manufacturing>>Machine Tools>>25.080.01 General Machine Tools
Standard Classification Number:Machinery>>Process Equipment>>J44 General Fixture
Publication information
other information
Focal point unit:Mechanical Science Research Institute
Introduction to standards:
JB/T 9162.27-1999 JB/T 9162.27-1999 Ball head clamp dimensions JB/T9162.27-1999 Standard download decompression password: www.bzxz.net
Some standard content:
JCS 25.080.01
Machinery Industry Standard of the People's Republic of China
JB/T9162.1-9162.48--1999
The parts and units of inspection jig1999-05-20 Issued
State Machinery Industry Bureau
Implementation on 2000-01-01
Machinery Industry Standard of the People's Republic of China
Ball gauge clamp
Bulbtypedlal bolder
Dimensions
This standard specifies the types and dimensions of ball gauges. Type and size
Type and size are marked as specified in the following figure and table:
Diameter 12mm, = 226mm ball head clamp: Table 12×226J/9162.27—1999
Approved by the State Machinery Industry Bureau on 1999-05-20 276
JB.T9162.27—1999
ZD[44001.27-87www.bzxz.net
2000-01-01
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.