GB/T 5692-1985 CAMAC terminology
Basic Information
Standard ID:
GB/T 5692-1985
Standard Name: CAMAC terminology
Chinese Name:
CAMAC术语的定语
Standard category:National Standard (GB)
state:Abolished
Date of Release1985-01-01
Date of Implementation:1986-10-01
Date of Expiration:2005-10-14
standard classification number
Standard ICS number:Mechanical Manufacturing>>Industrial Automation Systems>>25.040.40 Measurement and Control of Industrial Processes
Standard Classification Number:Instruments and meters>>Electrical instruments and meters>>N26 integrated test system
associated standards
Procurement status:≡IEC 678-80
Publication information
other information
Review date:2004-10-14
Drafting unit:Institute of Scientific Information of the Ministry of Nuclear Industry
Focal point unit:National Technical Committee for Standardization of Electrical Instruments
Publishing department:National Bureau of Standards
competent authority:China Machinery Industry Federation
Introduction to standards:
Please refer to this standard for details. GB/T 5692-1985 CAMAC terminology GB/T5692-1985 Standard download decompression password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of China
Definitions of CAMAC terms*
UDC 621.039-791bzxZ.net
.2: 621.317.39
GB5692—85
IEC 678-1980
Non-standard equivalent adopts the international standard ILC678 (I980) "Definitions of CAMAC terms used in IEC standards". This standard makes the following editorial changes to IEC 678: a.1 The content in the original quotation of E678 is not included in this standard**. b. 1. Some entries in IEC678-1 are preceded by an asterisk "*", which is not marked in this standard. C. The writing and arrangement format of chapters, clauses, sub-clauses and items in the content standard shall be in accordance with the general provisions of GB1.1-81 "Guidelines for the Preparation of Standardization Work". d. The IEC standards listed in Chapter 2 of this standard are being adopted as national standards by the country. After the National Bureau of Standards implements them, the codes and names of national standards will be rewritten. e. The "IEC000 standard" written in IEC678 has been changed to "IEC729 standard" in this standard. f. The "(26N≤32)" in 4) of 3.7.13 of IEC678 has been rewritten as \(26
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.