JB/T 2967.1-1999 Accuracy of cross-section woodworking circular saws
Basic Information
Standard ID:
JB/T 2967.1-1999
Standard Name: Accuracy of cross-section woodworking circular saws
Chinese Name:
横截木工圆锯机 精度
Standard category:Machinery Industry Standard (JB)
state:in force
Date of Release1999-05-14
Date of Implementation:2000-01-01
standard classification number
Standard ICS number:Wood technology>>woodworking equipment>>79.120.10 Woodworking machinery
Standard Classification Number:Machinery>>General Processing Machinery and Equipment>>J65 Woodworking Machine Tools and Machine Tools
associated standards
alternative situation:JB 2971-1984
Procurement status:ISO 7008 NEQ
Publication information
other information
Focal point unit:National Woodworking Machine Tools and Cutting Tools Standardization Committee
Publishing department:Fuzhou Woodworking Machine Tool Research Institute
Introduction to standards:
JB/T 2967.1-1999 This standard adopts the corresponding test items in ISO 7008 "Terms and acceptance conditions for single saw blade woodworking circular saws with or without moving worktable". This standard is a revision of JB 2971-84 "Precision of cross-cutting circular saws for woodworking". During the revision, only editorial changes were made according to relevant regulations, and the technical content was not changed. This standard specifies the geometric accuracy and working accuracy requirements and test methods of cross-cutting circular saws for woodworking. This standard is applicable to manually fed single saw blade cross-cutting circular saws with a saw blade diameter of 315~1000mm. This standard was first issued on February 11, 1984. JB/T 2967.1-1999 Precision of cross-cutting circular saws for woodworking JB/T2967.1-1999 standard download decompression password: www.bzxz.net