GB/T 2885.4-1981 Basic parameters and dimensions of bottom-dumping mine cars for metal mines
Basic Information
Standard ID:
GB/T 2885.4-1981
Standard Name: Basic parameters and dimensions of bottom-dumping mine cars for metal mines
Chinese Name:
金属矿底卸式矿车 基本参数及尺寸
Standard category:National Standard (GB)
state:Abolished
Date of Release1981-01-02
Date of Implementation:1982-07-01
Date of Expiration:2009-02-01
standard classification number
Standard ICS number:Mining and Mineral Products >> 73.100 Mining Equipment
Standard Classification Number:Railway>>Railway Vehicles>>S56 Narrow Gauge Industrial and Mining Railway Vehicles
Publication information
publishing house:China Standards Press
Publication date:1982-07-01
other information
Release date:1981-12-31
Review date:2004-10-14
Drafting unit:Beijing Nonferrous Metallurgy Design and Research Institute
Focal point unit:National Technical Committee for Standardization of Mining Machinery
Publishing department:China Machinery Industry Federation
competent authority:China Machinery Industry Federation
Introduction to standards:
GB/T 2885.4-1981 Basic parameters and dimensions of bottom-dumping mine cars for metal mines GB/T2885.4-1981 standard download decompression password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of China Basic Parameters and Dimensions of Metal Mine Bottom-dumping Cars GB2885.4—81 This standard applies to underground metal mines (or other mines with similar ore properties and mining methods) for transporting ore or other materials along underground tunnels and surface industrial sites. The basic parameters and dimensions of metal mine bottom-dumping cars should comply with the provisions of the table. Note: This figure only shows the dimension symbols.
Issued by the State Administration of Standardization
Proposed by the State Administration of Nonferrous Metals Industry10
Implemented on July 1, 1982
Drafted by Beijing Nonferrous Metallurgy Design and Research Institute
YDC4-7
YDC6-7
YDC6-9
Load
GB2885.4-81
Overall dimensions
Note: ①Height H and traction height h are calculated from the rail surface (when empty). ②Load is calculated based on the loose specific gravity of the material v=2.5t/m\. ③The dimensions in brackets represent the wheelbase of the bogie itself. Height
(800)
Traction heightbZxz.net
Traction force
TTiKAoiKAca
Total 3 pages Page 2
Unloading angle
(not small
(not large
Total 3 pages Page 3
GB2885.4-
2. The model of the bottom-dumping mine car for metal mines is specified as the marking example:
Volume 4m, track gauge 762mm Metal mine bottom-dumping mine car YDC4-7 mine car GB2885.4—81
Track gauge code: 7 means 762mm
9 means 900mm
Volume code (m3)
Mine car code
Bottom-dumping code
Metal mine code
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.