GB/T 5626.1-1985 Flared tapered thread straight pipe fittings
Basic Information
Standard ID:
GB/T 5626.1-1985
Standard Name: Flared tapered thread straight pipe fittings
Chinese Name:
扩口式锥螺纹直通管接头
Standard category:National Standard (GB)
state:Abolished
Date of Release1985-01-01
Date of Implementation:1986-09-01
Date of Expiration:2008-11-01
standard classification number
Standard ICS number:Fluid systems and general parts>>Pipeline components and pipelines>>23.040.60 Flanges, pipe joints and connecting parts
Standard Classification Number:Machinery>>General Parts>>J15 Pipe Accessories
Publication information
publishing house:China Standards Press
Publication date:1986-09-01
other information
Release date:1985-11-25
Review date:2004-10-14
Drafting unit:Standardization Institute of the Ministry of Machinery Industry
Focal point unit:National Technical Committee for Standardization of Pipe Accessories
Publishing department:China Machinery Industry Federation
competent authority:China Machinery Industry Federation
Introduction to standards:
GB/T 5626.1-1985 Flared tapered thread straight pipe fitting GB/T5626.1-1985 Standard download decompression password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of China
Flared type tube fittings-
Maleconnector-Assembly
This standard applies to flared tapered thread table-through pipe fittings for pipeline systems with oil and gas as the medium GB 5626.2-8
GB 5626.2-B5
Marking example:
A type flared thread straight pipe fitting with an outer diameter D of 10mm: pipe fitting A10GB5626.1-85bZxz.net
National Bureau of Standards 19B5-11-25 issued
UDC621.643.4
GB 5626.1-85
GB 564685
GB5648-85
1986·0901 implementation
Guide
GB5626.1—85
Technical conditions are in accordance with the provisions of GB5653-85 "Technical conditions for flared pipe joints". Additional notes:
This standard was proposed by the Ministry of Machinery Industry of the People's Republic of China and the Standardization Research Institute of the Ministry of Machinery Industry. Quality (steel)
kk/100 pieces
This standard was drafted by the Standardization Research Institute of the Ministry of Machinery Industry, [Haiye Long Annex:!, Changchun Automobile Research Institute, Shanghai Hydraulic and Pneumatic Research Institute. The drafters of this standard are Hu Lusheng, Li Yu, and Zhang Qianlong.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.