JB/T 9162.33-1999 Round contact dimensions
Basic Information
Standard ID:
JB/T 9162.33-1999
Standard Name: Round contact dimensions
Chinese Name:
圆触头 尺寸
Standard category:Machinery Industry Standard (JB)
state:in force
Date of Release1999-05-20
Date of Implementation:2000-01-01
standard classification number
Standard ICS number:Mechanical Manufacturing>>Machine Tools>>25.080.01 General Machine Tools
Standard Classification Number:Machinery>>Process Equipment>>J44 General Fixture
Publication information
other information
Focal point unit:Mechanical Science Research Institute
Introduction to standards:
JB/T 9162.33-1999 JB/T 9162.33-1999 Round contact dimensions JB/T9162.33-1999 Standard download decompression password: www.bzxz.net
Some standard content:
JCS 25.080.01
Machinery Industry Standard of the People's Republic of China
JB/T9162.1-9162.48--1999
Inspection fixture parts and components
The parts and units of inspection jig1999-05-20 Issued
State Machinery Industry Bureau
2000-01-01 Implementation
Machinery Industry Standard of the People's Republic of China
Contact
Dimengions
This standard specifies the type and length of wide-circuit contacts
The type and dimensions are as specified in the figure below.
Marking series:
Marking of round contacts with a diameter of 3mm:
Full head 362.33-9bZxz.net
Guohao Machinery Industry Bureau 1999-05-10 approved 40
JB/T9162.33-1999
B44501.33-7
2000-01-01 implemented
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.