JB/T 8343.1-1999 Parameters of horizontal woodworking band saws
Basic Information
Standard ID:
JB/T 8343.1-1999
Standard Name: Parameters of horizontal woodworking band saws
Chinese Name:
卧式木工带锯机 参数
Standard category:Machinery Industry Standard (JB)
state:in force
Date of Release1999-05-14
Date of Implementation:2000-01-01
standard classification number
Standard ICS number:Wood technology>>woodworking equipment>>79.120.10 Woodworking machinery
Standard Classification Number:Machinery>>General Processing Machinery and Equipment>>J65 Woodworking Machine Tools and Machine Tools
Publication information
other information
Focal point unit:Fuzhou Woodworking Machine Tool Research Institute
Publishing department:Fuzhou Woodworking Machine Tool Research Institute
Introduction to standards:
JB/T 8343.1-1999 This standard is a revision of ZB J65 010-89 "Parameters of horizontal woodworking band saws". During the revision, only editorial changes were made according to relevant regulations, and the technical content remained unchanged. This standard specifies the parameters of horizontal woodworking band saws. This standard is applicable to horizontal woodworking band saws for processing board skin. This standard was first issued on March 30, 1989. JB/T 8343.1-1999 Parameters of horizontal woodworking band saws JB/T8343.1-1999 standard download decompression password: www.bzxz.net
Some standard content:
ICS 79.120.10
Machinery Industry Standard of the People's Republic of China
JB/T8343.1~8343.2—199
Horizontal Woodworking Band Saw
Published on 1999-05-14
State Machinery Industry Bureau
2000-01-01 Implementation
JB/T8343.1—1999
Standard is a revision of ZB6510-89 Horizontal Woodworking Band Saw Machine Standard. During the revision, only editorial rectification is carried out according to relevant regulations: technical content and technical changes are made.
This standard replaces ZBJ6501089 from the date of implementation. The standard is listed in Appendix A of the standard.
This standard is proposed by the National Technical Inspection Committee for Woodworking Machine Tools and Tools, and the standard is under the jurisdiction of Fuzhou Woodworking Machine Tool Research Institute. The drafting unit of the standard is Xinyang Woodworking Machinery Co., Ltd. The main drafters of this standard are Wang Xihong, Shi Zhijie, Han Hui, and the standard was first issued on March 30, 1989. Scopebzxz.net
Machinery Industry Standard of the People's Republic of China
Horizontal Woodworking Band Saw Machine,
Parameterg of cheborizontal This standard specifies the parameters of horizontal band saw machines. This standard applies to horizontal band saw machines with 1.1-grade skin. Age
JB/T8343.1-949
Generation 5010:89
The type of horizontal wood band saw machine is shown in the figure! (not limiting the specific structure), and the parameters meet the specifications of pot 1. Figure Horizontal wood band saw machine
Table 1 Parameters of horizontal band saw machines
Main body name
Beam wheel diameter
National Machinery Industry Bureau J999-05-14 Approved 900
2000-01-41 Implementation
JB/T 8343.1-1999
Appendix A
(Suggested Appendix)
Other basic parameters of horizontal woodworking band saw machine AI For other basic parameters of horizontal woodworking band saw machine, see Table A! Table AI
Parameter name
Wheel light
X, center distance
Drive distance e
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.