GB 16208-1996 Hygienic standard for polyethylene in workshop air
Basic Information
Standard ID:
GB 16208-1996
Standard Name: Hygienic standard for polyethylene in workshop air
Chinese Name:
车间空气中聚乙烯卫生标准
Standard category:National Standard (GB)
state:in force
Date of Release1996-04-03
Date of Implementation:1996-09-01
standard classification number
Standard ICS number:Environmental protection, health and safety>>Air quality>>13.040.30 Air quality in the workplace
Standard Classification Number:Medicine, Health, Labor Protection>>Health>>C52 Labor Hygiene
associated standards
Publication information
other information
Release date:1996-04-03
Review date:2004-10-14
Drafting unit:Liaoning Provincial Institute of Labor Hygiene
Focal point unit:Ministry of Health
Publishing department:State Administration of Technical Supervision Ministry of Health of the People's Republic of China
competent authority:Ministry of Health
Introduction to standards:
This standard specifies the maximum permissible concentration of polyethylene in the air of a workshop and the monitoring and inspection methods. This standard applies to enterprises that produce and use polyethylene. GB 16208-1996 Hygienic Standard for Polyethylene in Workshop Air GB16208-1996 Standard download decompression password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of China
Health standard for polyethylene in the air of workplace
Health standard for polyethylene in the air of workplace1 Subject content and scope of application
This standard specifies the maximum allowable concentration of polyethylene in the air of workplace and the monitoring and inspection methods. This standard applies to enterprises that produce and use polyethylene. 2 Referenced standardswww.bzxz.net
GB 5748
3 Hygiene requirements
Determination method of dust in workplace air
The maximum allowable concentration of polyethylene in workplace air is 10mg/m2. 4 Monitoring and inspection methods
The determination of polyethylene concentration in workplace air shall be carried out in accordance with GB5748. 5 Supervision and implementation
Health supervision agencies at all levels are responsible for the implementation of this standard. Additional remarks:
This standard was proposed by the Ministry of Health of the People's Republic of China. This standard was drafted by the Liaoning Provincial Institute of Labor Hygiene. The main drafters of this standard are Xiao Xingyuan, Fang Yuxiang, Yong Ailun and Liu Zhanyuan. GB 162081996
This standard is interpreted by the Institute of Labor Hygiene and Occupational Diseases, Chinese Academy of Preventive Medicine, which is entrusted by the Ministry of Health. Approved by the State Administration of Technical Supervision on April 3, 1996 and implemented on September 1, 1996
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.